BlingBIKE :: Reflective Helmet and Bike :: Flag and Sticker Kits


Share

Put on *BlingBike Reflective Helmet Flags* and *BlingBike Reflective Bike And Helmet Stickers* to make your bike rides safer.

We also have some fun and free BlingBike reflective tips, as well as other BlingBike products you might like. Let's make your bike a little safer when you pedal to play, to work, to ride.


*BlingBike Reflective Helmet Flags*

The *BlingBike Reflective Helmet Flags* are this month's featured tip and product.

You can either buy a *BlingBike Reflective Helmet Flag* kit from us, or make your own. It is made of reflective tape or fabric attached to a heavy duty zip tie.

Attach the big, medium or small sized zip tie to the top of your helmet and then add the reflective tape or fabric that you get from us or buy somewhere else. Your *BlingBike Reflective Helmet Flag* will stick up in air while you are biking and make you more visible to all.

Buy 4 *BlingBike Reflective Helmet Flags* [pick lg, med or sm] :: $44


*BlingBike Reflective Bike and Helmet Stickers*

You can either buy a *BlingBike Reflective Bike and Helmet Stickers* kit from us, or make your own. We make the kit from rolls of white and orange reflective tape. You'll get at least thirty *BlingBike Reflective Bike and Helmet Stickers* to put on your bicycle.

Tell us if you prefer oval and curvy shapes stickers or rectangular and other polygon stickers. Your *BlingBike Reflective Bike and Helmet Stickers* will make you far move visible to car drivers and other bicyclists at night.

Buy 30 *Reflective Bike and Helmet Stickers* :: $44


*BlingBike Helmet Light*

Our BlingBike Helmet is made from a simple 4.5 inch tubular tactical LED flashlight, and a 5.5 x .165 inch O-ring.

Attaching the BlingBike Helmet Light to your helmet may be easy to complex, depending on the helmet design.

For some helmets, the basic installation method is to first run the O-Ring through the piece of tubing that we send you. Then run both loop ends of the O-Ring up through one of the holes on the top of the helmet. Then wrap one loops of the O-Ring around the front of the flashlight. Then wrap one loop of the O-Ring around the back of the flashlight. Try the next method if this does get a groovy light on your helmet.

For other helmets, the basic installation method is to first wrap part of the O-Ring around the front end of the flashlight. Then run the rest of the O-Ring down through one of the holes on the top of the helmet. Then run the O-Ring back up out of a different hole in the helmet. Then wrap the rest of the O-Ring around the other end of the flashlight. Try the next method if this does get a groovy light on your helmet.

For other helmets, send pictures of your helmet and we will suggest another method.

We recommend that you do not drill holes in your helmet. Some might consider drilling two little holes in a helmet to use one of the above methods. We don't recommend this at all. It will reduce the strength of the helmet and make it less safe.

Note: The light we send you may vary in length from 4 to 5 inch depending on our stock. The 5.5 inch O-ring is an OR-100 from Culligan and was designed for the big blue filter units.

*BlingBike Helmet Light* :: $74


*BlingBike Detailing*

We can turn your bike into a BlingBike.

If you are in our area, bring your bicycle [or helmet] to us and we will put on the reflective stickers for you to turn your bike [or helmet] into a BlingBike.

We will put on at least 40 *BlingBike Reflective Bike And Helmet Stickers* on your bike [or helmet]. We may also superglue the edges of some of the stickers if they are not sticking very well to your bike or helmet. Your BlingBike will make it far safer to bicycle at night.

*BlingBike Detailing* for Your Bike :: $340

*BlingBike Detailing* for Your Helmet :: $140


*BlingBike Bungie Cord Extenders*

If you use bungie cords with front or back racks and you wish they were more adjustable you will like these little ingenious things.

We make them by taking a short 10 inch piece of chord, coil it around the vertical stays on the rack, and then tie the two ends together. A bungie chord can be attached to the little loop that remains. When load is applied to the loop and 'prusik' coils it will lock in place. Then you can adjust your bungie in any location up and down on the rack stay.

To make it more BlingBike, we also add a little piece of reflective fabric to the cord. So there will be a little reflective flag wherever you have a *BlingBike Bungie Cord Extender* attached.

Although these little *BlingBike Bungie Cord Extenders* are easy to make, we are happy to make and mail them to you so you can make your biking even more safe.

*BlingBike Bungie Cord Extenders* :: $34


*BlingBike Refurbs*

We will be turning some used bikes and our custom built bikes into BlingBikes.

If you are in our area, ask about our currently available BlingBikes, or ones we expect to have soon.

*BlingBike Refurbs* :: $140 to $1,400


*Buy BlingBike Goodies*

Contact us via our contact page to order BlingBike Goodies. Funds will benefit XOEarth.org.

 

Note: Proceeds from sales benefit XOEarth.org. All sales final. No returns. Most of the products are assembled by the XOEarth editor, volunteers and friends in Boulder who are also working on other XOEarth climate education and big climate action incentives. These products help fund our projects that help cool down the Earth.

Share

About Stele

Earth Lovers, Write enviro songs, make art and media with me to inspire peeps to join us in taking eco actions that help save our imperiled Earth and slow down the climate change monsters. For love and life, Stele

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.